| B - Cone Width | 3.7500 in |
| Cone Part Number | EE350701 |
| Aa - Cage-Cone Backface Clearance | 0.84 in |
| R - Cone Backface To Clear Radius3 | 0.25 in |
| G1 - Heat Generation Factor (Roller-Raceway) | 827.7 |
| Cg - Geometry Factor | 0.157 |
| G2 - Heat Generation Factor (Rib-Roller End) | 77.3 |
| Design Units | Imperial |
| C0 - Static Radial Rating | 382000 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 | 153000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)7 | 114000 lbf |
| Cage Type | Pin-Type |
| a - Effective Center Location4 | 0.51 in |
| C90 - Dynamic Radial Rating (90 million revolutions)5 | 87600 lbf |
| Ab - Cage-Cone Frontface Clearance | 0.64 in |
| C1 - Dynamic Radial Rating (1 million revolutions)6 | 338000 lbf |
| db - Cone Backface Backing Diameter | 9.06 in |
| da - Cone Frontface Backing Diameter | 8.7 in |
| d | 7.0000 in |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 | 588000 lbf |
| 510TQO655-1 NSK Tapered Roller Bearings Double-row | Cor - Static Load Rating:67443 lbf; Dimension M:3.5 in; Dimension J:12.6 in; Dimension H:4.409 in; Shaft Size:70 mm; Note:This product line wa; Dimension H1:1.7 in; Seal Type:Viton Single Lip; Series Type:Medium Series; Dimension H2:9.9 in; Bearing Number:MSM70BR; Weight:67 lb; Pillow/Plummer Block |
| 300TQO460-1 TIMKEN Tapered Roller Bearings Double-row | Outer Diameter (mm):300; Bearing number:29430 M; (Grease) Lubrication Speed:800 r/min; d1:214 mm; D:300 mm; Weight:28 Kg; Basic static load rating (C0):5100 kN; T:90 mm; C:44 mm; d:150 mm; D1:285 mm; Bore Diameter (mm):150; Basic dynamic load rating (C):1610 kN; |
| 360TQO480-1 NSK Tapered Roller Bearings Double-row | B:22 mm; nG Fett:10000 1/min / Limiti; nG Ol:15000 1/min / Limiti; da:133,5 mm / Tolerance; rmin:1,1 mm; Width (mm):22; C0r:30000 N / Static loa; Bore Diameter (mm):120; a:44 mm; Bearing number:HS71924-E-T-P4S; ra max:0,6 mm; Outer Diameter (mm):165; d:120 mm; Cr:33500 N / Dynamic lo; Da:151 mm / To |
| 127TQO183-1 TIMKEN Tapered Roller Bearings Double-row | T:20.638 mm; r3 min.:2.3 mm; Calculation factor (Y):1.7; (Oil) Lubrication Speed:7500 r/min; Bore Diameter (mm):34.925; Bearing number:14585/14525; Basic dynamic load rating (C):48 kN; Basic static load rating (C0):57,5 kN; D:68.262 mm; (Grease) Lubrication Speed:5600 r/min; B:20.638 mm; r2 min.:3.5 |
| EE536136D/536225/536226D TIMKEN Tapered Roller Bearings Double-row | A:25,5 mm; Basic dynamic load rating (C):12,8 kN; Weight:0,59 Kg; Basic static load rating (C0):6,65 kN; A2:15 mm; d:20 mm; A0:33,3 mm; J:64 mm; A1:11 mm; S:12,7 mm; N:11 mm; Bolt (G):3/8; Bearing number:UCF204E; B:31 mm; Bore Diameter (mm):20; L:86 mm; |
| M257248D/M257210/M257210D TIMKEN Tapered Roller Bearings Double-row | Category:Roller Bearings; Characteristic outer ring frequency, BPF0:9.54 Hz; Lw:23.8 mm; Bore Diameter (mm):35,000; Inventory:0.0; Bearing number:K35X42X30; Characteristic rolling element frequency, BSF:10.91 Hz; Max operating temperature, Tmax:120 °C; Characteristic cage frequency, FTF:0.46 Hz; Cha |
| 67388D/67322/67322D TIMKEN Tapered Roller Bearings Double-row | Bore Diameter (mm):360; Max. shaft corner radius, or 45 deg. chamfer (ch1):1.100; Dynamic Load Rating (Cr):5,670,000; Weight (g):87,000.00; Max. housing corner radius, or 45 deg. chamfer (ch):3.000; Mis-alignment Angle (a deg.):3; Outer Dia (D):480.0000; Bearing number:GEC360HC; Outer Diameter (mm): |
| 420TQO650-1 NSK Tapered Roller Bearings Double-row | Outer Diameter (mm):230; d:130 mm; Bore Diameter (mm):130; Bearing number:23226 KCW33+AH3226; Basic dynamic load rating (C):690 kN; Weight:13 Kg; Width (mm):80; C:80 mm; d1:115 mm; Basic static load rating (C0):1060 kN; B1:4 mm; B2:15 mm; (Grease) Lubrication Speed:1300 r/min; D:230 mm; Size (mm):13 |